The Place That It Is Easy To Cut a Knife In CNC Machining

- Apr 02, 2018 -

In the CNC machining process, the conditions that is easy to break the knife:

This is the result of the operator's experience. Beginners may not consider these aspects. Therefore, similar encounters in processing may require attention.

(1) Generally, it is very easy to break the knife if we do not pay attention when we mill the trough. If we do not promptly knock out the place that has not been milled in the middle, the cutter will snap off during the fast milling.

(2) We did not pay attention to the processing contents on the drawings during processing, and we also had broken knife or plane collision when our code molds had just processed places.

(3) The knife was not caused by machining the knife. When finishing, we must remember to test the pendulum. We must also be familiar with the material of each template when processing. We must be familiar with the hardness of these materials to process, and different materials must be treated differently.

The CNC milling aerospace component, precision machined aircraft component processing requires special attention to these things.

CNC Milling Aerospace Component

FM is concentrate on CNC machining manufacturingprototype machininglow-volume manufacturingmetal fabrication and parts finishing services, provide you best support and services. ask us one inquire now.


Any questions or RQF for metal& plastic technology and custom machining, welcome to contact us below

Call +86-15322401809 or Send an inquire to us

Welcome visit us, any metal and plastic design and machining questions, we are here to support you. Our services email address:

Related Industry Knowledge

Related Products

  • Custom Steel Turning
  • Custom Precision Turned Parts
  • CNC Lathe Parts Service
  • CNC Turned Parts Service
  • OEM CNC Turning
  • CNC Machined Component Service