What’s the CNC Turning Centers included?

- Mar 30, 2018 -
  • Headstock

Gear and speed changing mechanism together with the main spindle are housed here. An electric motor drives the spindle though back in the early days, lathes were driven by the use of a flat belt pulley. More often than not the end of the main spindle has a Morse taper.

  • Bed

This is a base that is connected to the headstock. The connection ensures that the spindle access moves in parallel with the tailstock and carriage. The tailstock and carriage are restrained in a set rack by the bedways so as to facilitate movement.

  • Feedscrews and Leadscrews

Feedscrews are long driveshafts connecting to a series of gears that are on the apron so as to allow the carriage to drive along the Z-axis. The function of the leadscrew is the same only that it operates orthogonally to the feedscrew hence causing movement of the carriage along the X-axis.

  • Carriage

It is composed of the top/saddle and apron/the side. It moves the cutting tool perpendicularly for facing operations and longitudinally for turning operations.

  • Tailstock

This is the center mount that is positioned on the opposite side of the headstock. The spindle that is found in the tailstock does not rotate. From the function of a leadscrew, it moves longitudinally.

FM is concentrate on CNC machining manufacturingprototype machininglow-volume manufacturingmetal fabrication and parts finishing services, provide you best support and services. ask us one inquire now.


Any questions or RQF for metal& plastic technology and custom machining, welcome to contact us below

Call +86-15322401809 or Send an inquire to us

Welcome visit us, any metal and plastic design and machining questions, we are here to support you. Our services email address:


Related Industry Knowledge

Related Products

  • CNC Components Service
  • Custom Precision Machined Parts
  • Precision Machined Components Service
  • Precision Turned Parts Service
  • OEM Mechanical Parts
  • Custom CNC Machining Process